The 3d Printing Etf Price on September 25, 2024
| PRNT Etf | USD 21.64 0.18 0.82% |
Below is the normalized historical share price chart for The 3D Printing extending back to July 19, 2016. This chart has been adjusted for all splits and dividends and is plotted against all major global economic recessions. As of today, the current price of 3D Printing stands at 21.64, as last reported on the 28th of November, with the highest price reaching 21.67 and the lowest price hitting 21.50 during the day.
If you're considering investing in PRNT Etf, it is important to understand the factors that can impact its price. Currently, The 3D Printing is very steady. 3D Printing secures Sharpe Ratio (or Efficiency) of 0.0972, which signifies that the etf had a 0.0972% return per unit of volatility over the last 3 months. We have found twenty-nine technical indicators for The 3D Printing, which you can use to evaluate the volatility of the entity. Please confirm 3D Printing's risk adjusted performance of 0.0696, and Semi Deviation of 1.14 to double-check if the risk estimate we provide is consistent with the expected return of 0.13%.
PRNT Etf price history is provided at the adjusted basis, taking into account all of the recent filings.
3 y Volatility 25.96 | 200 Day MA 20.7431 | 1 y Volatility 25.3 | 50 Day MA 20.7042 | Inception Date 2016-07-18 |
PRNT |
Sharpe Ratio = 0.0972
| Best Portfolio | Best Equity | |||
| Good Returns | ||||
| Average Returns | ||||
| Small Returns | ||||
| Cash | Small Risk | PRNT | High Risk | Huge Risk |
| Negative Returns |
Estimated Market Risk
| 1.35 actual daily | 12 88% of assets are more volatile |
Expected Return
| 0.13 actual daily | 2 98% of assets have higher returns |
Risk-Adjusted Return
| 0.1 actual daily | 7 93% of assets perform better |
Based on monthly moving average 3D Printing is performing at about 7% of its full potential. If added to a well diversified portfolio the total return can be enhanced and market risk can be reduced. You can increase risk-adjusted return of 3D Printing by adding it to a well-diversified portfolio.
Average Mkt Cap Mil 4.9 K |
3D Printing Valuation on September 25, 2024
It is possible to determine the worth of 3D Printing on a given historical date. On September 25, 2024 PRNT was worth 20.17 at the beginning of the trading date compared to the closed value of 20.16. We use multiple weighted factors in our valuation methodologies to arrive at the intrinsic value of 3D Printing etf. Still, in general, we apply an absolute valuation method to find 3D Printing's value based on its fundamental and technical indicators available within our service. As compared to an absolute model, our relative valuation model uses a comparative analysis of 3D Printing where we calculate exposure to its market risk and evaluate relevant financial multiples and ratios against 3D Printing's related companies.
| Open | High | Low | Close | Volume | |
| 20.03 | 20.13 | 19.98 | 20.09 | 8,638 | |
09/25/2024 | 20.17 | 20.21 | 20.05 | 20.16 | 8,744 |
| 20.45 | 20.76 | 20.32 | 20.76 | 20,204 |
| Backtest 3D Printing | | | 3D Printing History | | | 3D Printing Valuation | Previous | Next |
3D Printing Trading Date Momentum on September 25, 2024
| On September 26 2024 The 3D Printing was traded for 20.76 at the closing time. The top price for the day was 20.76 and the lowest listed price was 20.32 . The trading volume for the day was 20.2 K. The trading history from September 26, 2024 was a factor to the next trading day price appreciation. The trading delta at closing time against the next closing price was 2.98% . The trading price change against the current closing price is 0.74% . |
3D Printing Fundamentals Correlations and Trends
By evaluating 3D Printing's financials over time, investors can gain insight into future company performance. However, you can also analyze the published financial statements to find patterns among 3D Printing's main balance sheet or income statement drivers and many other relevant indicators that can statistically be found significantly correlated or uncorrelated. PRNT financial account trend analysis is a perfect complement when working with valuation or volatility modules.About 3D Printing Etf history
3D Printing investors dedicate a lot of time and effort to gaining insight into how a market's past behavior relates to its future. Access to timely market data for PRNT is vital when making an investment decision, and regardless of whether you use fundamental or technical analysis, your return on investment in 3D Printing will depend on recognizing future opportunities and eliminating past mistakes. Historical data analysis is the study of market behavior over a given time. Recorded market-related data such as price, volatility, and volume can be quantified and studied over a defined period. Through a detailed examination of a market's past behavior, traders and investors can gain perspective on the inner workings of that market. The information obtained throughout analyzing 3D Printing stock prices may prove useful in developing a viable investing in 3D Printing
The fund normally invests at least 80 percent of its total assets in securities that are included in the funds benchmark index, depositary receipts representing securities included in the index or underlying stocks in respect of depositary receipts included in the index. 3D Printing is traded on BATS Exchange in the United States.
3D Printing Etf Technical Analysis
3D Printing technical etf analysis exercises models and trading practices based on price and volume transformations, such as the moving averages, relative strength index, regressions, price and return correlations, business cycles, etf market cycles, or different charting patterns.
Price Boundaries
3D Printing Period Price Range
Low | November 28, 2024
| High |
0.00 | 0.00 |
The 3D Printing cannot be verified against its exchange. Please verify the symbol is currently traded on BATS Exchange. If you still believe the symbol you are trying to look up is valid, please let us know, and we will check it as soon as possible.
3D Printing November 28, 2024 Market Strength
Market strength indicators help investors to evaluate how 3D Printing etf reacts to ongoing and evolving market conditions. The investors can use it to make informed decisions about market timing, and determine when trading 3D Printing shares will generate the highest return on investment. By undertsting and applying 3D Printing etf market strength indicators, traders can identify The 3D Printing entry and exit signals to maximize returns
3D Printing Technical and Predictive Indicators
Predictive indicators are helping investors to find signals for 3D Printing's price direction in advance. Along with the technical and fundamental analysis of PRNT Etf historical price patterns, it is also worthwhile for investors to track various predictive indicators of PRNT to make sure they correctly time the market and exploit it's hidden potentials. Even though most predictive indicators are useful for the short-term horizon, it's virtually impossible to predict the unforeseen market. For traders with a short-term horizon, predictive indicators add value when properly applied. Long-term investors, however, may find many predictive indicators less useful.
| Risk Adjusted Performance | 0.0696 | |||
| Jensen Alpha | (0.05) | |||
| Total Risk Alpha | (0.1) | |||
| Sortino Ratio | (0.01) | |||
| Treynor Ratio | 0.0778 |
| Cycle Indicators | ||
| Math Operators | ||
| Math Transform | ||
| Momentum Indicators | ||
| Overlap Studies | ||
| Pattern Recognition | ||
| Price Transform | ||
| Statistic Functions | ||
| Volatility Indicators | ||
| Volume Indicators |
Check out Your Equity Center to better understand how to build diversified portfolios, which includes a position in The 3D Printing. Also, note that the market value of any etf could be closely tied with the direction of predictive economic indicators such as signals in board of governors. You can also try the Equity Valuation module to check real value of public entities based on technical and fundamental data.
The market value of 3D Printing is measured differently than its book value, which is the value of PRNT that is recorded on the company's balance sheet. Investors also form their own opinion of 3D Printing's value that differs from its market value or its book value, called intrinsic value, which is 3D Printing's true underlying value. Investors use various methods to calculate intrinsic value and buy a stock when its market value falls below its intrinsic value. Because 3D Printing's market value can be influenced by many factors that don't directly affect 3D Printing's underlying business (such as a pandemic or basic market pessimism), market value can vary widely from intrinsic value.
Please note, there is a significant difference between 3D Printing's value and its price as these two are different measures arrived at by different means. Investors typically determine if 3D Printing is a good investment by looking at such factors as earnings, sales, fundamental and technical indicators, competition as well as analyst projections. However, 3D Printing's price is the amount at which it trades on the open market and represents the number that a seller and buyer find agreeable to each party.